86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


LEFOO INDUSTRIAL CO.,LTD.

Products >> DIAPHRAGM BOOSTER PUMP 115V

DIAPHRAGM BOOSTER PUMP 115V

Build Your Online Product Catalogs?



Description
Product Name: DIAPHRAGM BOOSTER PUMP 115V
Supply Ability:
Related proudcts peristaltic pump,
Specifications 1
Price Term:
Port of loading:
Minimum Order
Unit Price:

LEFOO diaphragm pump for water purifier 115V is an RO water pump. The diaphragm pump for water purifier 115V is supplied with alternating current (AC), and the AC voltage is capable of being set as a 115v water pressure pump, which is rectified into a direct current (DC) voltage through the built-in control panel of the pump which feeds power to the motor.

PRINCIPLE OF AC 115V POWERED DIAPHRAGM WATER PUMP
After being energized, the motor converts the electric energy through the shaft rotation to output a certain speed and torque into mechanical energy. The head of the diaphragm water pump is equipped with an eccentric device. When the shaft rotates, the diaphragm inside the pump is reciprocated through the eccentric mechanical device, so that the fluid in the pump cavity is stretched and compressed to form pressurization, which is generated at the water inlet and outlet The pressure difference draws the liquid into the pump cavity under the action of pressure and then discharges it from the water outlet.

REVERSE OSMOSIS PRE-PERMEATE TREATMENT
Pre-Permeate is critical for the lasting of an RO water system to prevent fouling, and too frequent cleanings, and premature failure of the ***n RO membrane. Here is common RO system issues about Pre-Permeate:

Fouling happens when contaminants accumulate and clogging on the membrane surface. There are many contaminants in municipal feed water that are naked to the human eye and harmless for human consumption, but large enough to quickly foul (or clog) by booster pump for ro system. Fouling typically exists in the front end of a bare RO system without filters and results in a lower actual RO pressure and a lower permeate flow.

FOULING CAN BE CAUSED BY THE FOLLOWING
1. Particulate or colloidal matter (dirt, silt, clay, etc.)

2. Organics (humic/fulvic acids, etc)

3. Microorganisms (bacteria, etc). B


Contact Us
Company: LEFOO INDUSTRIAL CO.,LTD.
Contact: lefoo group
Address: No.118, Changda Road, Linping Street, Yuhang District, Hangzhou, Zhejiang, 311100 China
Postcode:
Tel: 0571-89363666
Fax:
E-mail:         


Copyright© LEFOO INDUSTRIAL CO.,LTD. All Rights Reserved.
Tel : 0571-89363666 Fax :
Powered by 86exporter.com